**Contents**show

## How many LED lights can you put on a circuit?

CFL bulbs v LED bulbs

Each LED or CFL bulb normally produces the same amount of light as a 60W incandescent bulb while the current it draws is 10 watts or less. Therefore, the current drawn is 1/12 amp. A 15-amp circuit can, therefore, control **180 or more LED or** CFL bulbs.

## How many 100 watt lights can I put on a 15 amp circuit?

For 100-watt fixtures, you can have a maximum of 12 divided by 0.9A, or **13 fixtures**. If the lights will be used less than three hours at a time, you could install 16 fixtures on the circuit.

## How many amps do LED lights need?

When Dave connects incandescent bulbs to an amp meter, they draw up to 1.6 amps, but when LED lights are used, they only pull about **.** **26 amps**.

## How many outlets and lights can be on a 15 amp circuit?

Technically, you can have as many outlets on a 15 amp circuit breaker as you want. However, a good rule of thumb is 1 outlet per 1.5 amps, up to 80% of the capacity of the circuit breaker. Therefore, we would suggest a maximum of **8 outlets** for a 15 amp circuit.

## How many watts can run on a 15 amp circuit?

On average, a 15 amp breaker can run a one 1K light each without blowing or about **1800 – 2000 watts**. The only issue with relying on this formula is that it is advisable to only load a breaker up to 80 percent of its capacity. Overloading a 15 amp breaker can lead to very dangerous situations.

## Can I run a refrigerator on a 15 amp circuit?

Having the refrigerator on its own dedicated circuit is the recommended best practice for homeowners. Most refrigerators run between 3 to 6 amps, with that said, **a refrigerator can spike at peak usage up to 15 amps**. … You should have refrigerators and freezers installed on a 15-20 amp dedicated 120 volt circuit.

## How much power does a 12V LED light use?

With 12V systems, the lower voltage means more current must be supplied to compensate. For example, a 120V LED system will pull 1 Amp in a 120 Watt system, while a 12V LED system will need to pull **10 Amps** to power the same 120 Watt system.

## How many LED lights can you put on a 20 amp breaker?

You can put up to **40 lights** (based on 50 watt light) on a 20 amp breaker.