Can spotlights be used in a bathroom?
It is also often asked if you can have spotlights in a bathroom. Again, so long as you choose the correct IP rating for your bathroom zone, they are a great choice! Bathroom spotlights are often also referred to as downlights.
Do bathroom lights need to be fire rated?
Every downlight, whether a kitchen, bathroom or living room downlight, should be fire rated. This is for the safety of yourself, your family, and your home. … Investing in fire-rated lights, when compared with non-fire rated, shows a definite improvement in slowing the spread of fire through the home.
Where should Spotlights be placed in a bathroom?
Above the bath or shower to a height of 2.25m from the floor. Lights must be rated at least IP45 (typically, IP65 is used). An area extending 60cm beyond the bath, shower and wash basin, up to 2.25m above the floor.
What rating do bathroom lights need to be?
Zone 1 is the area above the bath or shower to a height of 2.25m from the floor. In this zone a minimum rating of IP45 is required but it is generally accepted that IP65 is to be used. It’s also worth noting that most shower lights are rated at IP65 in any case.
How many spotlights should you have in a bathroom?
A bathroom has 3 zones, so you need IP44 fittings if installing lights over a bath, shower, for that size of room I say 3 or 4 led downlighters should be ample in that space, depend on quailty of fitting used, beam spread,etc.
How do you know if a light is suitable for a bathroom?
Basically, if you situate lights inside designated ‘zones’ in a bathroom, the fittings need to have an IP rating (explained below). But outside those zones then any standard lights are fine to use.
Can I put a light above my shower?
While it may be tempting to place a decorative fixture above a shower, it’s not simply a matter of just picking out any ceiling light you like. A ceiling light that goes directly over a shower must be rated for damp or moist areas, and certain types of ceiling light are generally not suited for over-shower placement.
How do you know if a light is fire rated?
2 Answers from MyBuilder Electricians
Just remove one of the bulbs. If the back is open then they are not fire rated, if there is a metal housing that you can see behind the bulb then they are fire rated.