Will a regular dimmer switch work with LED lights?

How can I tell if my dimmer switch is LED compatible?

Check Your Existing Dimmer

The type of dimmer switch and it’s minimum/maximum load range will indicate the compatibility with LED light bulbs. Trailing edge dimmers work best with LED light bulbs and leading-edge dimmers work best with traditional incandescent and halogen light bulbs.

Can you use a standard dimmer with LED bulbs?

Yes, LED bulbs can be used on a dimmer but they need to be listed as dimmable. LEDs can still work with incandescent dimmers, but the compatibility is an essential factor. Look at manufacturers’ website to figure out the right bulb and dimmer for your home.

Can you use a regular light switch for LED lights?

The answer is absolutely not, dimmable LEDs when installed in a non-dimming switch will operate at 100% output and will run just as well as if they were installed with a dimming switch.

What makes a dimmer switch LED compatible?

Dimmer Switches work by reducing the power delivered to your light bulb. They do this by trimming a section of a waveform, either on the leading edge or trailing edge of the wave. Manufacturers have designed their LED light bulbs to be compatible with the majority of common ‘trailing edge’ household dimmers.

IT IS AMAZING:  Question: Are all LED bulbs outdoor?

Why do some dimmers not work with LEDs?

While most LED bulbs are now dimmable, not all of them are and not all of them dim in the same manner Since LEDs consume such a low wattage, many types of dimmers do not function with LED in the same way that they do with high wattage load incandescents. … Smaller amount of dimming rage (Typically 70-90% range vs.

Can dimmable LED bulbs be used in non-dimmable fixtures?

You can use a dimmable LED lamp in a non-dimmable circuit. You should NOT use a non-dimmable lamp in a dimmable circuit as it may cause damage to the lamp and or circuit.

Can you mix incandescent and LED lights?

Mistake #1: Mixing LED bulbs with incandescent bulbs is ok.

This is a no no. Mixing LED with incandescent lighting causes poor performance. If using both on the same circuit, your incandescent light will draw more power, causing the LED to flicker. The better advice would be, if you change one, change them all.

Are light switches different for LED lights?

The main difference is that you have a smaller dimming range (typically 70-90% range vs. 100% with incandescent or halogen). … A dimmer for LED lights is specially designed to send power and control signals to each type of electronic LED driver.